Biological and Ecological Engineering | Article | Published 2023

Physico-chemical characteristics of cannabis seed oil (Cannabis sativa L.) from different varieties grown in the conditions of the Syrdarya region

Authors:

Khabib Khushiev

Collection: E3S Web of Conferences 463, 01004 (2023)
Keywords: hemp oil

Abstract

The article considers the physico-chemical composition of cold pressed hemp oil from different varieties to ensure food safety and choose the most promising variety for cultivation in the conditions of Syrdarya region. The content of cold pressing oil in technical cannabis seeds (Cannabis sativa L) from three different varieties of Felina 32, Santica 27 and Rodnik, grown in the Syrdarya region, ranged from 29.1% to 31.70%. The protein, ash and moisture content was 23.44-26.95, 4.95-6.10 and 7.66-8.10 per cent, respectively. Some other physico-chemical results were: moisture 0.10-0.13, iodine number 148-160; density (25°C) 0.9150 0.9250 mg/ml ; acid value 1.22-1.76 mg KOH/g; peroxide value 5.5-7.8 meq O2/kg. It has been found that the investigated fatty acids hemp oils contain Linoleic acid(C18:2((cis-9,12) 54.15-59.48%, palmitic acid(C16:0), Palmitoleic acid ((C16:1(cis-10), stearic acid (C18:0), Acid (Behc8:0), Acid (C20:20:0), Archicic acid (C1:20:0:0:0), Acid (C8:0:0:0:0:0:0:0:0:0:0:0:8:8:8:0) (C22:1(cis-22:1(cis-13)) и Lignoceric acid (C24:0): 5.85-7.82, 0.10-0.18, 2.78-3.25, 11.80-12.65, 0.55-0.86, 0.20-0.32, 0.02-0.09, и 0.085-0.15 %, respectively. Flavonoids, rutins, quercetin and gallic acid were found to be 0.1-0.8, 0.5-0.12 and 1.2-2.4 mg/l. The following elements of calcium(Cd), iron(Fe), magnesium(Mg), sodium(Na), zinc(Zn), cadmium(Cd), and mercury(Hg) have been identified as 1.1-1.8, 0.4-0.9, 0.3-0.7, 0.08-0.15, 0.06-0.11 mg/100g. The results of this analytical study compared to the results found in the literature on hemp oils showed that technical cannabis (Cannabis sativa L.) for Uzbekistan is a potentially valuable non-traditional oil crop.

References

  1. 1. Council of Scientific and Industrial Research, The Wealth of India (A Dictionary of
  2. Indian Raw Materials and Industrial Products). Vol. II: Raw Materials, Council of
  3. Scientific and Industrial Research, New Delhi, 58–65 (1962)
  4. 2. M. Qaiser, Cannabaceae, in Flora of West Pakistan, Department of Botany, University
  5. of Karachi, Karachi, Pakistan, 1–5 (1973)
  6. 3. B.D. Oomah,, M. Busson, D.V. Godfrey, J.C.G. Drover, Characteristics of Hemp
  7. (Cannabis sativa L.) Seed Oil, Food Chem, 76, 33–43 (2002)
  8. 4. E. Bagci,, L. Bruehl, K. Aitzetmüller, Y. Altan, A Chemotaxonomic Approach to the
  9. Fatty Acid and Tocochromanol Content of Cannabis sativa L. (Cannabaceae), Turk. J.
  10. Bot., 27, 141–147 (2003)
  11. 5. C.E. Turner, M.A. ElSohly, E.G. Boeren, Constituents of Cannabis sativa L. XVII. A
  12. Review of the Natural Constituents, J. Nat. Prod., 43, 169–243 (1980)
  13. 6. Ü. Orhan,, S. Kumenoglu, B. Sener, GC–MS Analysis of the Seed Oil of Cannabis
  14. sativa L. Cultivated in Turkey, J. Fac. Pharm. Gazi Univ, 17, 79–81 (2000)
  15. 7. J.L. Deferne, D.W. Pate, Hemp Seed Oil: A Source of Valuable Essential Fatty Acids,
  16. J. Int. Hemp Assn, 3, 1, 4–7 (1996)
  17. 8. S. Grigoryev, Hemp Germplasm and Breeding Sticks in Aspects of Fatty Acid Profile
  18. and Tocopherols, Possible Usage in Medicine as Antioxidants,
  19. http://www.chanvreinfo.ch/info/en/rubrique19.html
  20. 9. J.B. Rossell,, Vegetable Oil and Fats, in Analysis of Oilseeds, Fats and Fatty Foods,
  21. edited by J.B. Rossell and J.L.R. Pritchard, Elsevier Applied Science, New York, 261
  22. 319 (1991)
  23. 10. S.H. Yoon, S.K. Kim, M.G. Shin, K.H. Kim, Corporative Study of Physical Methods
  24. for Lipid Oxidation Measurement, J. Am. Oil Chem. Soc., 68, 1487–1489 (1985)
  25. 11. J.C. Callaway, T. Tennilä, D.W. Pate, Occurrence of “Omega-3” Stearidonic Acid (cis
  26. 6,9,12,15-octadecatetraenoic acid) in Hemp (Cannabis sativa L.) Seed, J. Int. Hemp
  27. Assn., 3, 61–63 (1996)
  28. 12. K. Aitzetmüller, B. Matthäus, and M. Schmitz-Peters, Renewable Resources Series,
  29. Agency for Renewable Resources, 18, 116–124 (2001)
  30. 13. Z. Mehmedic, Actes du Congress International “Chevreul” pour l’Etude des Corps
  31. Gras, Tome 1, presented at the Premier Congress Eurolipid Angers, June, 6–9 (1989)
  32. 14. A.N. Mamadaliev, Kh. Khushiev, Comparative chemical analysis of non-drug varieties
  33. of cannabis sativa l. Grown in saline soils of the regions, Universum: chemistry and
  34. biology: scientific journal, ISSN: 2311-5459, 8, 86 (2021)
  35. 15. K. Aitzetmüller, Seed Fatty Acids, Chemotaxonomy and Renewable Sources, in Oils
  36. Fats–Lipids 1995: Proceedings of the 21st World Congress of the International Society
  37. for Fat Research, P.J. Barnes & Associates, High Wycombe, United Kingdom, 117
  38. 120 (1996)
  39. 16. L.G. Rumyantseva, N.K. Lemeshev, Current State of Hemp Breeding in the C.I.S., J.
  40. Int. Hemp Assn., 1, 49–50 (1994)
  41. 17. A.N. Mamadaliev, Kh. Khushiev, Z.R. Abdullaeva, Determination of flavonoids in
  42. different Oils of cannabis sativa l (cannabaceae) and Evaluation of physico-chemical
  43. indicators, Austrian Journal of Technical and Natural Sciences, ISSN 2310-5607, 5–6,
  44. 3-8 (2022)
  45. 7
  46. E3S Web of Conferences 463, 01004 (2023)
  47. https://doi.org/10.1051/e3sconf/202346301004
  48. EESTE2023
  49. 18. ISO 660: 2020, Animal and vegetable fats and oils. Determination of acid value and
  50. acidity (2020)
  51. 19. ISO 662:2016, Animal and vegetable fats and oils. Determination of moisture and
  52. volatile matter content (2016)
  53. 20. ISO 3960:2017, Animal and vegetable fats and oils Determination of peroxide value
  54. Iodometric (visual) endpoint determination (2017)
  55. 21. ISO 3961:2018. Animal and vegetable fats and oils. Determination of iodine value
  56. (2018)
  57. 22. ISO 6884:2008, Animal and vegetable fats and oils. Determination of ash (2008)
  58. 23. American Oil Chemists’ Society (AOCS), Official and Recommended Practices of the
  59. AOCS, 5th edn., AOCS Press, Champaign (1997)
  60. 24. C. Paquot, A. Hautfenne, International Union of Pure and Applied Chemistry
  61. (IUPAC), Standard Methods for the Analysis of Oils, Fats and Derivatives, 7th rev.
  62. edn., Blackwell Scientific, London (1987)
  63. 25. F. Anwar, M.I. Bhanger, T.G. Kazi, Relationships of Rancimat and AOM Values at
  64. Varying Temperatures for Several Oils and Fats, J. Am. Oil Chem. Soc., 80, 151–155
  65. (2003)
  66. 26. J.N. Thompson, G. Hatina, Determination of Tocopherols and Tocotrienols in Foods
  67. and Tissues by HPLC, J. Liquid Chromatogr, 2, 327–344 (1979)
  68. 27. H. Mölleken, R. Mothes, S. Dudek, Quality of Hemp Fruits and Hemp Oil in Relation
  69. to the Maturity of the Fruits, Bioresour. Hemp (Wolfsburg),13–16 (2000)
  70. 28. J.L.R. Pritchard, J.B. Rossel, Analysis and Properties of Oilseeds, in Analysis of
  71. Oilseeds, Fats and Fatty Foods, Elsevier Applied Science, New York, 39–102 (1991)
Loading...
0

Views

0

Reads

0

Comments

0

Reviews

0

Liked

0

Shared

0

Bibliography

0

Citations

Like and share on

Cite this publication

Copy text below and use in your article