Mechanical and Mechatronics Engineering | Article | Published 2021

Processing of teeth of saw blades of cotton processing machines with a stream of compressed air with abrasive particles

Keywords: saw blade, abrasive blasting, experiment planning, unevenness of height, pressure, angle of attack, lintering

Abstract

The regression equations are obtained, which make it possible to assess the degree of influence of the processing parameters on the height parameter of the surface roughness. As a result of abrasive blasting of linter saw teeth, a favorable micro-profile of their side surfaces was formed. Such a surface profile is able to enhance the contact interaction with the cotton fiber and to carry out its additional scraping from the seeds.

References

  1. E3S Web of Conferences 304, 03033 (2021) https://doi.org/10.1051/e3sconf/202130403033 ICECAE 2021
  2. © The Authors, published by EDP Sciences. This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0/)
Loading...
0

Views

0

Reads

0

Comments

0

Reviews

0

Liked

0

Shared

0

Bibliography

0

Citations

Like and share on

Cite this publication

Copy text below and use in your article